Evergreen products

Best Plaster In Pune

About ready mix plaster product is :

AAC Blocks:

Evergreen Auto cleaved Aerated Concrete (AAC) blocks are made out of Fly-Ash, Cement, Lime, Gypsum, Aluminum, Powder and Water. These blocks save your time & give higher strength to your construction.Evergreen best ready mix products in pune.

Everplast:

Everplast is a ready mix cement plaster with high quality additives which can be used

Efficiently on bricks , blocks, stone walls as well as on concrete surfaces.

Superjoint:

It is an Adhesive which is ready to use, self –curing cementations adhesive for mounting AAC blocks. Benefit from a super strong mechanical bond between blocks with its innovative thin bed solution and save labour cost & water

Water Proofing Chemicals:

Evercrete is an acrylic copolymer emulsion based additive for cement based coatings,mortar and screed to enhance its water proofing and mechanical properties such as adhesion, flexural, tensile, compressive and impact strength.

About ready mix plaster Specification :

Surface preparation  :  The surface must be thought & free from dirt, dust & loose particles. Metal brush the surface & clean the dust by air compressor or wash the surface with water. Oil & grease must be removed using degreasing solvents. Any damaged surface must be repaired by using polymer modified repair mortar (Evercrete) .

Mixing: Stir/Shake well the liquid component to a homogenous milky colour , before mixing transfer entire quantity of liquid component into mixing container, gradually start addition of powder component under constant mixing with a stirrer using motor stirrer at slow speed at 250 – 300 rpm for Approx 5 minutes to a homogeneous & uniform free flowing slurry.

Mixing Health & safety precaution

  • Clean tools & hand with soap
  • In case of contact with eyes, kindly rinse with water immediately
  • Protective clothing such as gloves and goggles should be worn at all times while using this product.

Write a comment